How to Work Safely and Effectively with an Angle Grinder (AG): Practical Tips and Recommendations

An angle grinder (AG) is an essential tool for cutting, grinding, and polishing metal, stone, and other materials. To ensure your work is both efficient and safe, follow these simple but important rules.

1. Distribute the Load Properly During Operation
   Using an angle grinder requires holding the tool in mid-air, so it’s crucial to distribute weight and load correctly. Beginners are advised to start with low-power models with discs 115-125 mm in diameter. Avoid tasks that seem risky until you gain enough experience.
2. Check the Disc Before Starting
   The main cause of accidents is disc defects such as chips or cracks.

• Chips are easy to spot visually.
• Cracks can be identified if the disc starts wobbling after turning on the grinder.

To avoid accidents, inspect the disc for defects before every use.

3. Use the Disc According to Its Purpose
   Each disc has clear markings indicating its intended use. Follow these recommendations:

• Abrasive discs are suitable for cutting metal, stone, or concrete.
• Do not use them for cutting wood or plywood.
• Never install saw blades for wood on an angle grinder, even if the bore matches.

Following these rules will help prevent injuries and tool damage.

4. Safety Gear and Precautions
   Protection is a must when working with an angle grinder. Always use:

• Protective goggles or a face shield.
• Work gloves.
• A disc appropriate for the material you’re working with.

Never remove the safety guard from the grinder or install discs larger than the tool’s specifications allow.

5. Storing Abrasive Discs
   Abrasive discs with a bakelite bond should be stored in a dry place. Moisture gradually weakens the bond, which may lead to damage during operation.

Conclusion
Working with an angle grinder is straightforward if you follow basic safety rules. Regularly inspect your tool, use the appropriate discs, and always prioritize safety. With the right approach and Ataman discs, your work will be comfortable, efficient, and safe!